The James Hardie Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board helps protect wood substrate from water and mold while maintaining tile adhesions. The backer board has an EZ Grid recessed fastener pattern for easy installation.
(15 reviews) 15
93%of customersrecommend this product14 of 15reviews
Rating Breakdown15 reviews
Ease of installation
93%of customersrecommend this product14 of 15reviews
For my purpose or use, the impressed "squares" for ease in laying tile, take away from my use which is a work surface for blowing glass. I believe that at one time, the surface was very smooth with no indentations.
Pros: High Quality of Material
Cons: product changed
0out of0found this review helpful.
Review 6 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
As a tile setter I use this product just about daily, and it is by far the best cement board to work with. It's lighter and much easier to cut than Durock and similar products, not to mention much easier to see your cut and layout lines on.
31out of33found this review helpful.
Review 7 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
Not sure why Hardy board is cheaper than regular backer board because its much better quality. It cuts easier, has a smoother surface along with an imprinted grid finish that helps tile to adhere. This is definitely the right choice.
22out of24found this review helpful.
Review 9 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
I built a full shower in the corner of my basement. I built the shower area ( 3 foot x 3 foot ) and used this backer board on concrete block ,I used firring strips spaced 12 inches apart then fastened the backer board to the firring strips with drywall nails, the nails go right into it. I use my circular saw to cut the board,makes dust so use a mask. It was easy to cut,but I have seen previous posts that use a utility knife and score it. Sounded like too much work plus all the blades you up. I then useda latex adhesive to put up my 4 x 4 ceramic tile on it. Best thing I ever did ,it was so easy ,just square up the back board ( it has lines on the one side ). The tile was easy to glue on and was stright as an arrow. Glad I bought this instead of the concrete board which is very heavy and not really a smooth finish to lay your tile on. Trust me, this is the way to go as far as setting tile on. As I mentioned before I did space out my firring strips 12 inches because of the thickness ( 1/4 ") as oppossed to the 16 inch centers with the 1/2' cement board. I just thought it would make the backer board more sturdy,but that's just me.
Pros: Very Adhesive, High Quality of Material, Easy to Install
16out of29found this review helpful.
Review 10 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
I started this project with nothing more than a trip to home depot. Saw the backer board and thought...why not! Got about 30 sheets with screws (what board doesn't need a lot of screws). By the time I was done, the whole room looked great! Had my soccer team over for a party afterwards and everyone signed their names on it. Now I wondering...what's next?
2out of9found this review helpful.
Review 11 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
I found HardieBacker™ concrete board to be very consistent in size and quality. The new versions even have an embosed one inch grid on one side to make alignment easier. Of course, they have marks or indents where the fastening screws should be placed. Once layed with a thinset cement to glue it to your old surface, one has a nice even and level (or vertical in the case of 1/2 inch backer board on walls) surface to lay your tile. I use it for all tiling on walls, floors and counter tops.
22out of36found this review helpful.
Review 12 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
As complete amateurs, we found this board fairly easy to work with. A word to the wise for novices though: be sure the use a saw that is sharp enough! We went through about 12 blades doing 300 sq. ft. of floor.
10out of15found this review helpful.
Review 13 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
I layed this down over my sub floor in my bathroom to lay tile down. It was easy to cut with a razor blade and easy to install. I used hardiebacker screws and thin set to lay it. Tiles stuck to this extremely well also.
8out of12found this review helpful.
Review 14 for Hardiebacker 5 ft. x 3 ft. x 1/4 in. Backer Board
VOC aside (because I am not sure what the VOC on a more professional "CEMENT" board is but probably its worse than this paper stuff) - \besides that, I wouldnt recommend this for too many things. It does work but if its hit just hard enough it flakes apart, if its cut wrong on installation, it flakes apart and if screws are not fastened properlly...yep, it flakes apart. It littereally brakes into layers like a flint rock except the layers are just like thin card board, paper like. So yea it does work if your carfull, but even at that it gives and moves a lot. If screws, again, are put in wrong or to tight, the stuff will brake and allow movement which will then allow for craking in the mortar and so on...And given the competition and same pricing, the other options on the shelves are much better for any serious, sustainable, professional Tile project! I used to use this stuff until I was shown the better options. Another thing, you cant snap cut this with a knife vary easily. Durock or wonderboard for ex, you can...not to mention all the other benefits... =)