728*90 Advertising Space
Home Depot Ratings and Reviews
Home>

Customer reviews for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit

Weld-Pak 100 Wire Feed Welder MIG Conversion Kit

The Lincoln Electric Weld-Pak 100 Wire Feed Welder MIG Conversion Kit has a gas regulator for argon and argon-blend gases. This kit is designed to convert the Weld-Pak 100HD from a flux-cored welder to a MIG and flux-cored welder. It includes a 0.025-0.030 in. (0.6-0.8mm) cable liner, two 0.025 in. contact tips, a gas nozzle, a 2 lb. spool of 0.025 in. SuperArc L-56 mild steel MIG wire connectors, an adapter for CO2 cylinders and a 115-Volt gas solenoid hose.
Overall rating:
5 / 5
5
 / 
5
(7 reviews) 6
Open Ratings Snapshot
100%of customersrecommend this product6 of 6reviews
Rating Breakdown 7 reviews
5.0 out of 5.0
5
(7)
4
(0)
3
(0)
2
(0)
1
(0)
Ease of installation 
4.5 out of 5.0
4.5 out of 5
Quality 
5.0 out of 5.0
5 out of 5
Value 
4.8 out of 5.0
4.8 out of 5
100%of customersrecommend this product6 of 6reviews
Customer questions and answers:
1 Question | 1 Answer
Customer reviews for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit
Review 1 for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit

actually very easy to install

PostedMarch 19, 2013
Overall rating 
5.0 out of 5.0
5 out of 5
Ease of installation 
3.0 out of 5.0
3 out of 5
Quality 
5.0 out of 5.0
5 out of 5
Value 
4.0 out of 5.0
4 out of 5
I was a little worried to remove the cover of my welder and start changing anything but it was really pretty easy. Great upgrade. So glad I did it.
Pros: Easy to Install, Good Instructions
+2points
2out of 2found this review helpful.
Review 2 for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit
from Michigan, USA
Age Range:55 to 64
,
Gender:Male
Home Improvement Profile:Professional

Great upgrade for your welder

PostedAugust 7, 2013
Overall rating 
5.0 out of 5.0
5 out of 5
Ease of installation 
5.0 out of 5.0
5 out of 5
Quality 
5.0 out of 5.0
5 out of 5
Value 
5.0 out of 5.0
5 out of 5
I wanted to improve my welding so I bought this upgrade kit . It took no time to install and what a difference in the welds. I highly recommend this
Pros: Easy to Install, Good Instructions
+1point
1out of 1found this review helpful.
Review 3 for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit

Works Great!!!

PostedMay 15, 2013
Overall rating 
5.0 out of 5.0
5 out of 5
Ease of installation 
5.0 out of 5.0
5 out of 5
Quality 
5.0 out of 5.0
5 out of 5
Value 
5.0 out of 5.0
5 out of 5
I ordered this kit to convert my welder to a mig running a CO2 tank. After the easy installation I was very pleased on how much better the welds look! Should have done this a long time ago!! Installation time was less than 1 hour.
Pros: Reliable, Easy to Install, Good Instructions, No Leaks, everything
+1point
1out of 1found this review helpful.
Review 4 for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit
from San Jose, CA, USA
Age Range:45 to 54
,
Gender:Male
Home Improvement Profile:DIYer

Great Upgrade

PostedApril 30, 2013
Overall rating 
5.0 out of 5.0
5 out of 5
Ease of installation 
5.0 out of 5.0
5 out of 5
Quality 
5.0 out of 5.0
5 out of 5
Value 
5.0 out of 5.0
5 out of 5
After a couple of years of using flux core I finally went back to Gas Shielded on my 125HD. The install was very easy and the welds are so much better. Definitely worth the money. Just make sure you buy the right part number as I ordered the wrong upgrade twice before checking my owners manual.
Pros: Easy to Install, Good Instructions
+1point
1out of 1found this review helpful.
Review 5 for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit
from DIY Jack of All in Austin, TX

Argon welding is the way to go!!!

PostedNovember 24, 2006
Overall rating 
5.0 out of 5.0
5 out of 5
When I bought my little MIG welder from Home Depot years ago I also bought this little kit allowing me to use Argon gas when welding. You know how things go - I heard it was a good idea but I never hooked it. If someone would have told me just HOW good of an idea it was, I would have done it a long time ago. Though I have welded a mile of steel without the Argon, now that it's hooked up, I can be proud of my nicely beeded welds. They have no slag, and I'm penetrating much deeper. I thought this MIG was only capable of welding 1/8" or so of steel thickness but I'm now welding 1/4" easily. The Argon allows you to stay in one place MUCH longer so your penetration of the metal is increased dramatically.
Buy this attachment or the welder set that has the attachment already. HOOK IT UP! You'll be glad you did and you won't have to take all those criticisms from your friends about how lousy your welding is. Your welds will look great and be much stronger.
-
V
+1point
1out of 1found this review helpful.
Ratings-only reviews for Weld-Pak 100 Wire Feed Welder MIG Conversion Kit
Based on the average of (2) ratings-only reviews
Overall rating 
5.0 out of 5.0
5 out of 5
1 out of 1 recommend this product