728*90 Advertising Space
Home Depot Ratings and Reviews
Home>

Customer reviews for Reconditioned 10 in Cast Iron Table Saw with Free Hat

This product is no longer available. Continue shopping at Home Depot.

Reconditioned 10 in Cast Iron Table Saw with Free Hat

Toolless blade guard can be easily removed or replaced. 40 tooth carbide blade for fast ripping and smooth crosscuts. IND-I-CUT Alignment Disc accurately aligns cut line with blade. New rip fence design with micro-adjust 36 Ft.' rip capacity for ripping wider material. Up front controls for easier access. Herc-U-Lift Mobile Base for easy transportation. TEFC (Totally Enclosed Fan Cooled) Motor keeps dust and debris out of motor to extend life. Cast iron extensions with clamping surface allows jigs and featherboards to be clamped in place easily.
Overall rating:
5 / 5
5
 / 
5
(4 reviews) 4
Open Ratings Snapshot
100%of customersrecommend this product4 of 4reviews
Rating Breakdown 4 reviews
5.0 out of 5.0
5
(4)
4
(0)
3
(0)
2
(0)
1
(0)
100%of customersrecommend this product4 of 4reviews
Customer reviews for Reconditioned 10 in Cast Iron Table Saw with Free Hat
Review 1 for Reconditioned 10 in Cast Iron Table Saw with Free Hat
from Florida, SW Coast, God's coutry

Great Table Saw

PostedSeptember 1, 2008
Overall rating 
5.0 out of 5.0
5 out of 5
I purchased the reconditioned 3650 and when I received it I had a pleasant surprise in that it looked absolutely new with the exception of a couple of dents in 2 of the legs which caused a bit of a problem when setting the saw up but that was easily overcome with the help of a friend.
The saw is great. plenty of power crosscutting and ripping. I built a large doghouse inside of a hurricane fenced kennel. Instead of purchasing PT 2X4's I ripped down 2X6's for the project. I changed out the blade that came with the saw and installed a 10X30 blade. The saw went through the 2X6's like butter. I also ripped through 4X8 1/2" PT plywood with ease. I could have used a power saw but decided to use the table saw and am happy I did. I've started a project for a corner stereo cabinet made out of black walnut. A blade change again to a !0" X 70 finish blade (Freud). Again, crosscutting and ripping is smooth and easy with the saw never over loading. Cuts are absolutely even.
I am very happy and delighted with this purchase from Home Depot. For another note, delivery was quick, about 5 days and the delivery folks were helpful in putting the saw exactly where I wanted it.
+11points
11out of 11found this review helpful.
Review 2 for Reconditioned 10 in Cast Iron Table Saw with Free Hat
from Cincinnati ohio

ridgid reconditioned table saw

PostedAugust 4, 2009
Overall rating 
5.0 out of 5.0
5 out of 5
I missed out buying a clearance table saw and I took a chance on buying a recondition table saw and came out being a winner. You can't beat iron table saw. I got great price at home town store at 45% off! It was together already. Read the manual safety tips and setup. Easy readable instructions. The large table area provides ease of cutteing plywood. The fence makes it easy to make small adjustments. The 15 amp motor cut a piece of red oak about 2 in thick easily. The safety guide and the splitter guide was thin enough for thin kerf blade. It fits 5/8 ambor dado set up 3/4 in. Can connect the my dust collecting system. The Ridgid tool are all great tools. I to get the band saw next reconditioned or new.
0points
0out of 0found this review helpful.
Review 3 for Reconditioned 10 in Cast Iron Table Saw with Free Hat
from maryville tn

one good saw

PostedMarch 18, 2009
Overall rating 
5.0 out of 5.0
5 out of 5
i have had my saw about a month now. it is every thing and more that i expected it to be. the fence is the best. i have had table saws for years and this is the best saw that i have ever had.i love to build furniture and crafts. this saw out prefot=rms all of the other saws by a country mile. i would buy the same saw the next time
0points
0out of 0found this review helpful.
Review 4 for Reconditioned 10 in Cast Iron Table Saw with Free Hat
from Akron, OH

Great product

PostedMarch 18, 2009
Overall rating 
5.0 out of 5.0
5 out of 5
Product is very user friendly, stable and has very smooth operation. Assembly directions were a little frustrating, but the saw itself is perfect. I have several Rigid tools, and I have not been disappointed.
0points
0out of 0found this review helpful.