728*90 Advertising Space
Customer reviews for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Texture-Pro 200 Hopper Gun with 3 Spray Tips
This Wal-Board Tools Texture-Pro 200 Hopper Gun with 3 Spray Tips works with most gravity-fed texture materials. It has a 1-piece body with a comfortable grip and on-gun flow control.
Overall rating:
(11 reviews) 11
Rating breakdown 11 reviews
5 stars
9
4 stars
1
3 stars
0
2 stars
0
1 star
1
10 out of 11(91%)customers recommend this product.
Customer reviews for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Review 1 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Ungainly, they all are, but it has most of the features
,PostedJanuary 3, 2012
handiman
PRO:
1 you can control the air from the gun, without having to put on a ball valve; 2, when you let go of the trigger you don't spew air and muck, 3, easy enough to clean; 4, easy enough to change out orifice, and they are cheap to replace if lost or worn; 5, easy enough to hold onto, even for ceiling jobs; 6, works for a couple of rooms, and even really small jobs, my little Makita (2.4gpm at 90psi) will run it.
1 you can control the air from the gun, without having to put on a ball valve; 2, when you let go of the trigger you don't spew air and muck, 3, easy enough to clean; 4, easy enough to change out orifice, and they are cheap to replace if lost or worn; 5, easy enough to hold onto, even for ceiling jobs; 6, works for a couple of rooms, and even really small jobs, my little Makita (2.4gpm at 90psi) will run it.
CON: 1, no way to keep track of the orifices, I drilled a 10/24 screw onto the hopper to hold them so I could find them; 2, no easy way to change or turn the hopper, without using a wrench; 3, no easy way to stand the thing up to fill it or set it down to take a call; 4, not as easy as the ones with "dial an orifice", but when they wear out on this gun, easy and cheap to buy new orifices.
Yes, I recommend this product.
Share this review:
+9points
9out of 9found this review helpful.
Review 2 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
easy to use
,PostedDecember 7, 2011
sportmonty
Age:45 to 54
Gender:Male
Home improvement profile:DIYer
Level of expertise:Beginner
Purchase frequency:Yearly
Quality
5
/
5
Value
5
/
5
we are remodeling a office with plaster walls and wanted the walls to look more like a sheetrock walls.used the large tip .took a little practice to get the psi setting right for the pattern i wanted but after that i was able to shoot the 900 sq ft office in a couple of hours.it took longer to mix the mud than it did to shoot the texture.great tool for the price.tthe house is next
Yes, I recommend this product.
Share this review:
+1point
1out of 1found this review helpful.
Review 3 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Works great, easy to use, the job came out great
,PostedOctober 28, 2011
Steph
Quality
5
/
5
Value
5
/
5
I am very pleased with this texture gun. I had never used a texture gun before, but I have used a gravity feed paint gun. They both work very simliar. I was a little worried at first, but the gun was easy to use and came with good instructions. I did the walls and the ceiling and it all came out looking perfect. This is a great product and I am excited to use it again.
Yes, I recommend this product.
Share this review:
+3points
3out of 3found this review helpful.
Review 4 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
This product had great features
,PostedSeptember 30, 2011
626Glendora
Age:45 to 54
Gender:Male
Home improvement profile:DIYer
Level of expertise:Advanced
Purchase frequency:Yearly
Quality
5
/
5
Value
5
/
5
This product had great features for the value. I had no prior experience at texturing walls but had experience painting cars with a spray gun. It was no different, triggering the texture gun with the updated model was simple. I did a medium texture with a knock-down effect. Turned out great!
Yes, I recommend this product.
Share this review:
+4points
4out of 4found this review helpful.
Review 5 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Did the trick
,PostedJune 26, 2011
perryg114
This thing did the trick. I had about a 3sq ft area that I had used those spray cans on and it just was not cutting it. If you have more than about 1ft sq of area the cans are not the way to go. I will use this one again and probably loan it to a friend or two. I used the medium texture mix with about 30 psi of pressure and the big nozzle to get a pretty heavy texture. It is not the fastest thing in the world but I did not play with higher pressures. I think you could do large areas with it no problem but practice first to get your settings on a piece of scrap dry wall. I wish I had gone this route in the first place a can is $15 each and I wasted 2 cans without good results.
Yes, I recommend this product.
Share this review:
+7points
7out of 7found this review helpful.
Review 6 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Good Product
,PostedMay 1, 2011
I was skeptical at first, you get what you pay for. I didn't want to spend a lot on a not so good tool. I look around, read reviews and spend a lot of hours searching for a good product before I buy it. This tool exceeds my expectations. If you are not skilled at texture do not do it yourself, stick to the spray cans as they are easier to adjust and are good for small touch up jobs. I have done two bathrooms and a family room and no problems at all. It was easy to set up, use and clean. It works really good if you plan on doing areas at a time, you will spend a lot of time loading the hopper if you plan on doing a large area at once. I would definitely buy this tool again.
Yes, I recommend this product.
Share this review:
+3points
6out of 9found this review helpful.
Review 7 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
trigger does not work
,PostedJuly 16, 2010
I tried to do small patches but when adjusted to match orange peel, trigger won't stop all the way makes a mess
not information on how to adjusted or fixed.
no web site or phone #
not information on how to adjusted or fixed.
no web site or phone #
No, I do not recommend this product.
Share this review:
-10points
2out of 14found this review helpful.
Review 8 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Pro 200 in the Hands of an Experienced Amatuar
,PostedJuly 3, 2010
ExperiencedAmatuar
I bought the Pro 200 because it appeared that it would work with my relatively small air compressor. It was easy to follow the settings that came with the gun. When it said to only use 1/2 trigger, I was concerned at first, but then saw that there is a knob you turn so the amount of trigger is locked.
I used premixed texture that had to be thinned to be like thick paint. Then I tested it on a piece of scrap. It wasn't real fast or powerful, but that was a good thing for someone who had never done texture before.
My wife even had me texture a room that had been wall-papered and it made a great improvement after being textured, primed and and then painted.
Yes, I recommend this product.
Share this review:
+8points
8out of 8found this review helpful.
Review 9 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Great Tool
,PostedJune 18, 2010
I got this gun to texture my house after removeing popcorn.ive done two rooms so far and it works great.you can adjust the gun to get the texture you like.its easy to use .cleaning gun is easy to.
Yes, I recommend this product.
Share this review:
+6points
7out of 8found this review helpful.
Review 10 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Hopper Gun
,PostedApril 25, 2010
blackshoeshandyman
Great tool. Well worth the money. I looked at several and went with this model. This tool was easy to use and a great price. i only wish I had more work to use it. I am a general maintanence and handyman and this tool made my work easy and fun.
Yes, I recommend this product.
Share this review:
+7points
7out of 7found this review helpful.
Review 11 for Texture-Pro 200 Hopper Gun with 3 Spray Tips
Overall rating
Works great
,PostedMarch 30, 2010
I've used this guy on about 12 jobs now and I have never had a problem. Cleans up easy, exchanges tips and other parts coming off - easy. etc... =)
Yes, I recommend this product.
Share this review:
+9points
11out of 13found this review helpful.