The Lightkeeper Pro fixes most light sets and pre-lit trees in seconds. It finds the damaged bulb at the plug or at the bulb socket. The audible continuity detector pinpoints the problem by tracing the circuit to the point of interruption. Use the attached LED headlight to guide your way and let the 3-way bulb puller gets tight bulbs out with ease. Features a handy storage compartment built into the handle for housing your bulbs and fuses.
(199 reviews) 199
84%of customersrecommend this product162 of 192reviews
Rating Breakdown199 reviews
84%of customersrecommend this product162 of 192reviews
After spending several hours trying to fix a pre-lit tree, I decided to purchase the LightKeeper Pro. I was skeptical that it would work (at least the "fix trigger" part), but I thought I could use the voltage detector. I came home and tried the "fix trigger" on one section of the pre-lit tree and it worked on the first trigger pull. After that, I tried it on the top section and it took pulling the trigger about 12 times. Worked great and I went on to fix a few other strands of lights with it!
Well worth the money. Not totally sure how it all works but I have a prelit tree and four of the strands were only partially lit. I was prepared to just add new lights when i found this on line. I got in the car a drove to the store immediately. I had every strand but one working in less than five minutes. The one strand i still ended up going bulb by bulb to find the bad connection. The voltage detector was hard to use on the prewired tree because all the wires are so close together. One other suggestion would be to pick up extra bulbs while you are at the store to replace any that are bad. I can see using it for other low voltage projects too.
I know. When something sounds to good to be true it usually is...but not this thing. Trust the reviews like I did. Spent 3 hours checking our tree after getting it down for the season. Large sections were out this year. Went to home depot and was home for 2 mins before I had it fixed. I keep telling all my friends if they have any lights go out to get this asap!!
Pros: Easy to Assemble, Easy to Install, Looks Great, Perfect Size, Good Size & Weight, Functional, Lots of Features, Nice Design
This product does everything thing it says. If you are tired of replacing strings of Christmas lights, this will save you money. My very first try only took one pull of the trigger to restore the strand of lights that weren't working!
Pros: Perfect Size, Good Size & Weight, Functional
I had a pre-lit tree that had a section of lights not working so for the past few years I just strung another set around it. I got this hoping to fix the pre-lit strand and had it working within minutes. I then fixed 3 other strands of lights just as easily.
This is the best tool ever and simply amazed and surprised me! I found a gorgeous 6 ft prelit tree at a thrift store for $5 but the lights did not work. I took the tree home and bought this tool at Home Depot after reading good things about it but I was still skeptical. A few 'clicks' later with this handy tool, all the lights, both whiite and colored strings worked on my $5 tree! For under $20 total I now have a perfectly good beautiful prelit tree that was probably $400 new. This thing should be advertised on TV b/c we have all had to throw away strings of lights. Love love love it!!!
I normally do not buy products like this thinking they normally do not work. BUT this product is amazing. It has saved me the last 3 years on strands of lights that went out and tracking down where the issue was.
My brotherin law told me about this and I thought he was crazy, guess what. It works just like it said it would, plug it in and pull the trigger then presto there working. And sets that it wouldn't fix well with the built in voltage detector ,finding the concern is a brezzzzzzz.. Throw in the bulb and fues tester all in the same tool and PRESTO Daddy looks like a genius.
I would recommend this tool to every one that is putting up lights it's a must have.
I spent an hour and a half struggling with my pre lit tree trying to find the bulbs that were causing several strands not to light up. I looked online for a solution and found this. Went to Home Depot and picked one up. Got home, pulled a bulb and clicked it once. The strand came on. Are you serious? How does this work? Fixed 3 of 4 strands. The other feature (that detects electricity flowing through the wiring) didn't really work. It didn't even beep reliably on working strands. Still, for the time and hassle it saves, worth it! 2 weeks later, my neighbor is hanging christmas lights, gets them all up and then finds a section out. I pull out this tool and in 3 clicks, it's fixed. Before you spend hours checking each bulb, just buy one of these. Money well spent (even if the second feature doesn't work).
This product will save you HOURS of frustration and headaches. Gets to the problem bulb quickly without having to pull and check each bulb. Get's those old strings back into service before the bearded guy shows up on the 24th.
When I first saw this item at The Home Depot, it seemed a product too good to be true. But it works remarkably well. A very detailed instruction sheet is stored in the handle. What if the problem is neither with the bulb, nor with the shunt but due to a bad or broken connection? The audible voltage detector allows you to trace this down. I'm impressed with this product. Rather than fooling twenty or thirty minutes trying to find out why a section of my lights will not light up (and this happens almost every year), this tool will help fix it in a few minutes! Be aware that the tool requires 3 batteries (L1154) which are included. I would recommend replacing these every season before using the tool. I fixed an unlit section of my Christmas tree lights with one pull of the trigger and a bad section of my outdoor icicle lights in less than 10 minutes with the voltage detector.
I bought this after one strand on my pre-lit tree would not light. I used the quick fix trigger and after a few pulls, my strand worked again! I was amazed. I also like the storage compartment, the voltage detector, and well everything about it! I wonder why this product is not advertised? It should be because it would be a great seller. The only reason I knew about it is because I happened to stumble upon it here on the internet. Great product!
Pros: Excellent Quality, Functional, Lots of Features
I had a few strings of lights that wouldn't light up completely, and by using this I was able to get all the good bulbs to light, which made it very easy to find the bad ones. In one case, there were 5-6 bulbs that had burned out, which would have taken forever to figure out by just looking at the bulbs.
After spending hours of time over the past two days, my son found this product. All I can say is I wish he found it sooner because it fixed all of the problems with our lights that are pre strung on the tree. I had to use the trigger a few times and also had to use the voltage tester to isolate the issues but this tool made easy work of that. Stop banging your head against the wall trying to figure out which bulb is the issue and buy this!
Saved my 7 year old pre-lit tree. Had several bulbs that were out and I was ready to trash the tree. Purchased the Lightkeeper Pro and it found all the burned out bulbs. Replaced them all within 10 minutes and didn't need to purchase a new tree.