Ideal for new or replacement residential or commercial installations. The 120,000 BTU Input KG7SC Series 92.1 percent efficiency residential gas furnace has a 34 1/2 in. tall cabinet and is designed for installation in up-flow and horizontal applications. This single stage, high efficiency furnace is natural gas ready and convertible to propane (LP Gas) with the optional GLP 028 conversion kit. All KG7SC furnaces are certified for Category IV venting and may be vented either through a side wall or roof applications using approved plastic as allowed by the National Fuel Gas Code. Features an electronic hot surface igniter for increased safety and efficiency, and adjustable 4 speed maintenance free direct drive blower that never needs lubrication, and self diagnostic control module to monitor operation. The primary heat exchanger is constructed of tubular aluminized steel and has a stainless steel secondary heat exchanger. Units are factory assembled, wired and tested to assure safe dependable and economic installation and operation. NOTE: Requires 1/2 in. input to gas valve, dedicated circuit breaker, and 120-Volt wiring with proper polarity and ground. Consumer is required to register the product within 60 days of installation to qualify for extended 10 years parts warranty and limited lifetime heat exchanger warranty. Dimensions: 34.5 in. H x 24.5 in. W x 28 in. D. Not certified for mobile home use.
I had to return the furnace to Home Depot and buy a more expensive model from the installing mechanical company. BEWARE OF THE WE INSTALL IT PROMISE. DO NOT BELIEVE IT! You MUST buy the furnace and all parts from the installer... and I have an email from Home Depot corporate to prove it.