Looking for Answers about Pfister 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome?

Customer questions and answers for
Pfister 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome

With over 100 years of experience creating high quality faucets and accessories that deliver exceptional value, style and innovation, Pfister is a trusted name and a leader in the plumbing industry. It's the experience that matters. Yours and ours.
Customer questions and answers:
5 Questions
 | 
5 Answers
Overall rating:
3.083 out of 5
3.1
out of
5

Customer questions and answers for Pfister 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome

Question

What is the difference between these Pfister tub/shower kits

Asked by
Kathy
PA
about 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome on
February 25, 2012
Model #001-3110 and #01-341? Both say that they come with the rough in valve, but I have seen on other sites that the valve must be ordered separately. Please advise.
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Pfister
February 27, 2012
Pfister model # 001-3110 and # 01-341 are a complete Tub and Shower set, which include rough in valve and trim. Rough in valve included in model # 001-3110 has no stops, and model # 01-341 comes with screwdriver stops. The stops on a valve allow for the water supply to be shut off right at the valve. This allows the homeowner or plumber to maintenance the valve without having to shut the water supply off to the rest of the house.
+2points
2out of 2found this answer helpful.
Question

Pfister model # 001-3110 and # 01-341 differences

Asked by
Kathy
about 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome on
February 28, 2012
The only difference then between the two models is that the 01-3110 valve has no stops and the 01-341 does? Is the water flow rate the same for both models?
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Pfister
February 28, 2012
Pfister model #001-3110 and # 01-3410 both have the same rough in valve and trim. Both units come with a 5’’ IP threaded non-diverting tub spout and 2.5 gallons per minute shower head.
0points
0out of 0found this answer helpful.
Question

can this be mounted on the bathtub?

Asked by
cookie
about 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome on
October 19, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Pfister
Lake Forest, CA
October 21, 2013
Pfister 01 series is an in-wall installation and is not recommended as a tub mounted valve. Pfister does manufacture a tub mounted unit model #801-SVHC also a 3 handle unit, internet #203331540.
+1point
1out of 1found this answer helpful.
Question

Does the spout comes with a aerator? I just bought it and the water coming out of the spout is eratic

Asked by
NJ123
stamford, ct
about 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome on
February 19, 2014
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Pfister
Lake Forest, CA
February 20, 2014
Pfister supports a lifetime warranty for most parts and defects. Please contact Pfister Consumer Service at 1-800-732-8238 for troubleshooting support and warranty replacement parts.
0points
0out of 0found this answer helpful.
Question

what is the thread type "H"

Asked by
David
California
about 01 Series 3-Handle Tub and Shower Faucet in Polished Chrome on
March 31, 2014
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Pfister
Lake Forest, CA
March 31, 2014
Please contact Pfister consumer service and tech support at 800-732-8238 for assistance, the information provided in the question is not enough to fully understand the question.
0points
0out of 0found this answer helpful.
1 of 1