Looking for Answers about InSinkErator Badger 1 1/3 HP Continuous Feed Garbage Disposer?

Customer questions and answers for
InSinkErator Badger 1 1/3 HP Continuous Feed Garbage Disposer

The InSinkErator Badger 1 1/3 HP Continuous Feed Garbage Disposer features a quick-mounting system that allows for easy installation or replacement. This sturdy garbage disposer is constructed from galvanized steel and features a 26 oz. chamber for space-saving waste disposal. The garbage disposer also features a 1,725 RPM, 1/3 HP motor that rapidly grinds food waste for easy rinsing down the drain.

Customer questions and answers:

11 Questions

14 Answers

Ask a new question

Overall rating:

3.8

out of

Read all 70 reviews70

Shop now

Customer questions and answers for InSinkErator Badger 1 1/3 HP Continuous Feed Garbage Disposer

Question

My crusher "In Sink Erator Badger 1, 1/3 HP" does not turn on due to a small pebble stone stuck inside. How can I open it?

asked 4 months, 3 weeks ago

Shiv

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

+2points

2out of 2found this question helpful.

Answer this question

2 answers

Answers

answer 1

turn the motor manually with an allen wrench till the stone frees itself then remove it.

answered 4 months, 1 week ago

Fulfy38

Rhode Island, USA

+1point

1out of 1found this answer helpful.

answer 2

Hi Shiv - Thank you very much for your question. For the issue of a jam, please call our customer service department at 1-800-558-5700, who can troubleshoot the issue with you and walk you through the steps. Hope this gets resolved for you soon.

answered 4 months, 3 weeks ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

clogged garbage disposal

My badger is clogged-we have already cleared all pipes, only water stays in disposal now-Can you help me?

asked 4 months, 2 weeks ago

gritz

winchester Virginia

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

2 answers

Answers

answer 1

Replace it , Drain cleaners will only eat the insides and cause it to leak.

answered 4 months, 1 week ago

Fulfy38

Rhode Island, USA

0points

0out of 0found this answer helpful.

answer 2

Hello to you and thank you for your question. I'm sorry to hear about your clogged disposer. There could be one or several factors causing this. The Grind Shear Ring inside the disposer or Disposer Discharge tube could be clogged and those are just a couple of possibilities. To better troubleshoot the issue and get it resolved, I will recommend to call our customer service line at 1-800-558-5700 so they can assist step-by-step.

answered 4 months, 2 weeks ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

How do I get the plug out for dishwasher

asked 2 days ago

poor john

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

2 answers

Answers

answer 1

Hello and thank you for your question. Please reference the installation and care instructions for the Badger 1 disposer found here: http://www.homedepot.com/catalog/pdfImages/38/38b128b9-91e8-49fc-a01a-8e31191f5959.pdf
If the disposer is already installed we recommend that you un-install (make sure to disconnect electrically first), then knock the plug out using a screwdriver and hammer (see images attached), retrieve the plug from inside the disposer using a plyers and then reinstall the disposer. Thank you again for your question and I hope this information is helpful.

answered 1 day ago

InSinkErator

0points

0out of 0found this answer helpful.

answer 2

Hello poor john and thank you for your question.

You can knock out the drain plug of the InSinkErator Badger 1-1/3 HP Continuous Feed Garbage Disposer and remove it for the dishwasher by referring to Figure 16 of the Installation Guide found here: http://www.homedepot.com/catalog/pd.... Please wear safety glasses to protect your eyes.

Best wishes on your project.

answered 1 day ago

Designing Woman

Atlanta, GA

0points

0out of 0found this answer helpful.

Question

Is 113268 in stock at Sports Arena?

asked 7 months ago

grandbo

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello Valued Customer,
Thanks for your question. Model BADGER 1, Internet # 100036481 is readily available at your local Home Depot store NE Toledo #3848, 1035 W Alexis Rd, Toledo, OH 43612. The contact number for that location is (419)476-4573.
Please keep in mind this item is also readily available for online purchase today. Online shipping is free for this item! A great buy. I hope this helps!
If you have any additional questions for us, please contact our Online Customer Service department at 800-430-3376.
Thanks!

answered 7 months ago

THD

0points

0out of 0found this answer helpful.

Question

Is sku# 113268 InSinkErator Badger 1 1/3 HP Garbage Disposer in stock today at Auburn, Indiana Home Depot?

asked 6 months ago

Fido

Auburn, Indiana

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello Valued Customer,
Thanks for your question and interest in this item. Model BADGER 1, Internet number 100036481 is currently available within your local Home Depot store. The Auburn, In store number 2024 has 7 in stock. Your local store’s contact information is 403 Smaltz Way, Auburn, IN 46706, (206) 920-1866. I hope this helps!
If you have any additional questions or need assistance placing an online order, please feel free to contact our Online Customer Service department at 800-430-3376.
Thanks!

answered 6 months ago

THD

0points

0out of 0found this answer helpful.

Question

Does the Insinkerator Badger 1 have a model number of 1-83?

asked 5 months, 1 week ago

bgilson

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello to you, and thank you for your question. Yes. "Badger 1” is the primary model name. The “-83” is a suffix to the model number for internal use only. Hope this information is helpful and good luck with your project.

answered 5 months, 1 week ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

Are the Badger 1 disposals all the same, i want to replace one with a model # B179?

asked 4 months, 3 weeks ago

cortezh1

Dallas

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello to you and thank you very much for your question. All Badger 1 models are 1/3HP and will feature identical hook-up dimensions. Hope this information is helpful to you and good luck with your project!

answered 4 months, 3 weeks ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

I have an Whirlpool disposal gc100x will the Insinkerator Badger 1 have the same plumbing mount?

asked 4 months, 2 weeks ago

tombell

middleburg florida

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

+1point

1out of 1found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello to you and thank you for your question. Yes, the Badger disposer will have the same rough-in specifications for mounting. Hope this information is helpful and good luck with your project!

answered 4 months, 2 weeks ago

InSinkErator

+1point

1out of 1found this answer helpful.

Question

my disposal has a # 5-75 on it I don't know the brand name, how will I know which model will fit

asked 1 month, 2 weeks ago

scoot

Jonesboro

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello and thank you for your question. It sounds like, from your description, that this is a Badger 5. This can be confirmed by looking at the nameplate spec sticker located toward the base of the unit. The upper left of the sticker will say “Model _________”. (see photo below) Presuming it is a Badger 5, any other Badger unit will feature the same hookup dimensions; the Evolution Compact (which I've included a product link below for your convenience) also uses the same dimensions. Thank you very much and I hope this information is helpful.

Products related to my answer

Evolution Compact 3/4 HP Continuous Feed Garbage Disposer

(143)

answered 1 month, 2 weeks ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

I turn the switch and there is no sound and the sink clogs, what can be done?

asked 3 weeks, 2 days ago

cindy

cosprings,CO

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello Cindy and thank you very much for your question. There are a few possibilities as to what could be causing this. At your earliest convenience, please give our AnswerLine a call at 1-800-558-5700 and they will troubleshoot the problem with you.

answered 2 weeks, 5 days ago

InSinkErator

0points

0out of 0found this answer helpful.

Question

How many blades are located inside of this Badger 1 disposal

When our used dispsal is running & turned off it shakes the counter top like there is something off balance. We can only feel 2 blades inside of disposal. Can one of them be missing?

asked 1 week, 1 day ago

Kathryn

Colfax, CA

on Badger 1 1/3 HP Continuous Feed Garbage Disposer

0points

0out of 0found this question helpful.

Answer this question

1 answer

Answers

answer 1

Hello and thank you for your question. Each of our disposers feature two impellers. That is most likely what you are feeling in the disposer. The impellers work by pushing food waste to the shredder ring surrounding the interior of the grind chamber by using centrifugal force. To best troubleshoot this issue, I would recommend calling our AnswerLine at 1-800-558-5700.

answered 5 days ago

InSinkErator

0points

0out of 0found this answer helpful.

1 of 1

Shop now