Looking for Answers about SIMPSON STRONG-TIE ET22 Epoxy-Tie 22 oz. Cartridge?

Customer questions and answers for
ET22 Epoxy-Tie 22 oz. Cartridge

ET is a two-component, high solids, epoxy-based system for use as a high-strength, non-shrink anchor grouting material. Resin and hardener are dispensed and mixed simultaneously through the mixing nozzle. Use for threaded rod anchoring, rebar doweling, bonding hardened concrete to hardened concrete, pick-proof sealant around doors, windows and fixtures, and paste-over for crack injection.
Customer questions and answers:
3 Questions
 | 
3 Answers
Overall rating:
5 out of 5
5
out of
5

Customer questions and answers for SIMPSON STRONG-TIE ET22 Epoxy-Tie 22 oz. Cartridge

Question

what color is this product when dry

Asked by
delilah
about ET22 Epoxy-Tie 22 oz. Cartridge on
May 16, 2012
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
SimpsonStrong-Tie
Pleasanton, CA
May 17, 2012
Delilah,
When properly mixed, the ET Epoxy-Tie® adhesive will be a uniform medium gray color.

Thank you!
0points
0out of 0found this answer helpful.
Question

how much wet conditions can this stand up to

Asked by
sickdogg
home
about ET22 Epoxy-Tie 22 oz. Cartridge on
August 31, 2012
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
SimpsonStrong-Tie
Pleasanton, CA
September 4, 2012
Sickdogg,
Please see the following link for information on the ET-HP™ (formerly ET) installed in damp, wet and submerged environments: http://www.strongtie.com/products/anchorsystems/information/supplemental_info.html#damp.

Thank you!
0points
0out of 0found this answer helpful.
Question

how many 1/2 rebar dowels can you install with one set of tubes

Asked by
rick
visalia
about ET22 Epoxy-Tie 22 oz. Cartridge on
November 2, 2012
drilling a 5/8 hole 5" deep and installing a 1/2" piece of rebar in it.
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
SimpsonStrong-Tie
Pleasanton, CA
November 5, 2012
Rick,
The ET22 will have 41 installations per cartridge when installing a 1/2" diameter (#4) rebar 5" deep in a 5/8" diameter hole. Please see the following link to our Estimating Guide for reference: http://www.strongtie.com/products/anchorsystems/adhesives/epoxy_estguide.html#22ozrebar.

Thank you!
+2points
2out of 2found this answer helpful.
1 of 1