Looking for Answers about Gardner 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating?

Customer questions and answers for
Gardner 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating

GARDNER Aluma-Seal is a premium, fiber reinforced, aluminum roof coating. This is our highest quality, aluminum coating formulated to provide the brightest and longest lasting finish. This product dries to a silver shield of protection and reflects the sun's destructive UV rays. This tough durable seal offers great waterproofing protection while protecting and preserving the underlying roofing materials. Built-in rust inhibitors aid in the prevention of corrosion for metal surfaces. Aluma-Seal renews the look of worn roofs while offering superior protection from the elements.The Gardner Aluma-Seal Premium Aluminum Roof Coating offers waterproofing protection while protecting and preserving the underlying roofing materials. The fiber reinforced, aluminum roof coating reflects UV rays. Covers approx 50 sq. ft. per-Gal.
Customer questions and answers:
5 Questions
 | 
5 Answers
Overall rating:
4.5 out of 5
4.5
out of
5

Customer questions and answers for Gardner 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating

Question

can I use it on my motorhome (it has an aluminum roof )

Asked by
Bill
Ferndale , Pa.
about 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating on
August 16, 2012
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
GardnerGibson
Tampa FL
August 27, 2012
Yes, the product can be used on an aluminum roof.
0points
0out of 0found this answer helpful.
Question

could you use cover coat of this produci over an existing asphalt shingle system to extend the life of the roof

Asked by
rp0313
about 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating on
September 24, 2012
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
GardnerGibson
Tampa FL
September 26, 2012
The Asphalt Roofing Manufacturers Association (shingle manufacturers) generally recommends against coating asphalt shingles for a number of reasons. Please see the bulletin by following this link:
http://www.asphaltroofing.org/pdf/tb_227.pdf
-1point
0out of 1found this answer helpful.
Question

Can this product be applied over modified bituim and rolled roofing

Asked by
red
about 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating on
January 22, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
GardnerGibson
Tampa FL
January 28, 2013
This product can be applied over both modified bitumen and conventional roll roofing. Follow preparation and application instructions.
0points
0out of 0found this answer helpful.
Question

what is the coverage on this product?

Asked by
Bert
Slidell, La.
about 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating on
April 22, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
GardnerGibson
Tampa FL
April 23, 2013
Coverage rate is approximately 50 square feet per gallon per coat for smooth surfaced built up roofing and approximately 75 square feet per gallon per coat for metal roofing. Two coats are recommended.
0points
0out of 0found this answer helpful.
Question

can this product be applies on wet surfaces?

Asked by
guido
north tonawanda ny 14120
about 4.75-Gal. Aluma Seal Premium Fibered Aluminum Roof Coating on
May 8, 2012
my roof is leakin and this product was suggested by a friend
+1point
1out of 1found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
Designing Woman
Atlanta, GA
May 8, 2012
Hello guido and thank you for your question.

This product should be applied between 60- 100°F (not exceeding 100°F) on a clear sunny day with no rain for at least 24 hours. The application sheet gives more instructions for surface preparation: http://www.gardner-gibson.com/files....

Best wishes with this project.
+1point
2out of 3found this answer helpful.
1 of 1