Looking for Answers about RIDGID 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums?

Customer questions and answers for
RIDGID 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums

Whether you need to replace the hose that was originally included with your vac, the extra reach of a longer hose or the extreme durability of our Pro Hose the RIDGID family of hoses has a solution for you. This RIDGID locking replacement hose is a direct replacement for the 1-7/8 in. by 7 ft. hose originally included with most RIDGID 4, 6, and 9-gal. vacuums and includes all the adapters needed to fit any RIDGID vacuum.
Customer questions and answers:
3 Questions
 | 
9 Answers
Overall rating:
4 out of 5
4
out of
5

Customer questions and answers for RIDGID 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums

Question

will this work as an extension for the 1 7/8" hose on the 3-gallon Rigid wet/dry vac?

Asked by
Ben
about 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums on
July 15, 2012
0points
0out of 0found this question helpful.
Answer this question
4 answers
Answers
answer 1
Asked by
RIDGID
July 16, 2012
I’m not sure which extension hose you are referring to since there’s no part number specified. But if you are looking for an extension hose for the 3-gallon vac, you could get the same 7-foot super flex hose (831327 part number). You can special order it at Home Depot stores, or over the phone at 1-800-474-3443 options 1, 3 and 1 or on-line at www.ridgidparts.com using this link http://ridgidparts.com/cgi-bin/etcTable?showTable=1&table=WD30500-Figure1&image=Vac.

Thanks,
RIDGID
0points
0out of 0found this answer helpful.
answer 2
Asked by
David
August 27, 2012
yes
0points
0out of 0found this answer helpful.
answer 3
Asked by
Satch
Lawrenceville, GA, USA
October 30, 2013
Adapting to the inlet of the vacuum can be an issue, but can be accomplished with PVC fittings and rubber plumbing adapters connectors. Measure the inlet and go to a hardware store to see what might work. I would generally replace with the same size hose, bigger hose are less flexible and heavier and you have to adapt at the accessory end of the hose to fit your tools.
0points
0out of 0found this answer helpful.
answer 4
Asked by
kj3602
Phoenix, AZ, USA
January 4, 2014
The adapters will let it work on the popular sizes.
0points
0out of 0found this answer helpful.
Question

i need a 2.25 dia. in. hose what is this?

Asked by
scotter
united states
about 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums on
August 24, 2013
0points
0out of 0found this question helpful.
Answer this question
4 answers
Answers
answer 1
Asked by
Jim55
Myrtle Beach, SC, USA
April 1, 2014
My vacuum uses the 1 7/8 hose. H.D. offers replacement hoses in several sizes.
0points
0out of 0found this answer helpful.
answer 2
Asked by
Satch
Lawrenceville, GA, USA
October 30, 2013
This is a hose for a vacuum system, not a pressure hose to pump with. If you are looking to replace a hose from an existing shop vacuum. I'd replace the hose with the same size. Longer hoses can be connected if needed. If you are looking for a hose for a fixed (central vacuum system) I would not go this large, It's very hard to route and store when not in use.
0points
0out of 0found this answer helpful.
answer 3
Asked by
kj3602
Phoenix, AZ, USA
January 4, 2014
It has adapters that will fit.
0points
0out of 0found this answer helpful.
answer 4
Asked by
RIDGID
August 26, 2013
Please be informed that the VT1720 is a replacement hose for vacuums that have 1 7/8” hose diameter. If you are looking for replacement hose for 2.25 diameter vacs, please check VT2520.
0points
0out of 0found this answer helpful.
Question

WHAT IS THE ADAPTER WITH THE RED BUTTON FOR

Asked by
HANK
JANESVILLE WI
about 7 ft. Tug-A-Long Wet/Dry Vacuum Hose for RIDGID Wet/Dry Vacuums on
April 8, 2014
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
RIDGID
April 22, 2014
The adapter with the red button is for other vacs that have different inlet size. If you have any further questions please contact us at 800-474-3443.

Thank you
RIDGID
0points
0out of 0found this answer helpful.
1 of 1