December 13, 2011
This is Donna with GE and I will be happy to help you with your question on the GE Adora 30 in. Self-Cleaning Freestanding Electric Convection Range in Stainless Steel Model # JB710STSS.
Flat Bottom pans are essential for good cooking performance since the bottom of the pan needs to touch the glass for the best heat transfer. Most current brands sold today have flat bottoms. Much older, used cookware and/or thinner cookware will show signs of no longer being flat. Non-flat pans may crack the glass.
Use Medium or Heavy-Weight cookware.
* Stainless Steel is highly recommended. A sandwich clad bottom is especially good because it combines the durability and stability of stainless steel with the heat conduction and distribution of aluminum or copper.
* Heavy-Weight Aluminum cookware is also recommended. It conducts heat faster than other metals and cooks evenly. Aluminum residue sometimes appears as scratches on the cooktop, but these can be removed if cleaned immediately.
* Copper Bottom pans are also good, but they can leave residues on the cooktop that appear as scratches. These can be removed if cleaned immediately, but do not let a copper bottom pan boil dry. An overheated copper pot will leave a residue that will permanently stain the cooktop.
* Porcelain/Enamel pans give good performance only if they have a thick, flat bottom. Avoid boiling these pans dry, as porcelain can melt and fuse to the surface.
* Glass or Ceramic cookware is not recommended. These pans may scratch the surface. Glass is a poor conductor of heat so cooking times will be longer and they may require constant attention during cooking.
* Stoneware is not recommended. It may scratch the surface and will give poor performance.
* Cast Iron cookware is not recommended. If the cookware has a burr or rough spot, it will scratch the glass surface. Additionally, it is slow to absorb heat. Once this type of cookware heats up, especially on high heat, it holds an intense amount of heat which is transferred to the cooktop. This can cause the element to shut down as a response to the temperature limiters which indicate surface temperature is too high for cooktop components to handle.
I hope this helps. Should you have any additional question, please let us know.
5out of 5found this answer helpful.