Looking for Answers about Liberty 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack)?

Customer questions and answers for
Liberty 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack)

The Liberty French Romantics 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) are casual style pulls featuring die-cast zinc construction with a finish in oil-rubbed bronze with copper highlights. Mounting hardware is included. Ideal for use as an accent for kitchen or bathroom cabinetry or furniture.
Customer questions and answers:
5 Questions
 | 
8 Answers
Overall rating:
5 out of 5
5
out of
5

Customer questions and answers for Liberty 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack)

Question

Screws are too short

Asked by
zubie
Gardnerville, NV
about 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) on
August 10, 2014
We purchased 20 of the above, but the screws are too short. Need about 1 1/4" inch screws due to thicker trim around each door. Can you sell longer screws...1.5" is too long.
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
LibertyHardwareSupport
August 19, 2014
Good Afternoon.I do apologize for the inconvenience. We do not sell differentsize screws, but please contact out customer solutions department for further assistance. 1-800-542-3789
0points
0out of 0found this answer helpful.
Question

Are these pulls polished chrome as shown in the picture or a satin finish?

Asked by
Judy
about 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) on
May 30, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
LibertyHardwareSupport
May 30, 2013
The pull is a Satin Nickel finish, not Polished Chrome.
+1point
1out of 1found this answer helpful.
Question

how to measure

Asked by
jacky
watertown
about 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) on
January 10, 2013
It looks like they are 3 inches from screw to screw (in side cabinet, but ??? I'm replacing 11 handles in a very old kitchen. Is 3 inches a standard size? Do I measure in between the screws or outside screw to screw. I am measuring 3 inches, but inside it measures 2 & 1/2. I'm so confused
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Asked by
Bgbob
Ohio, USA
December 25, 2013
The 3 inches is from center of hole to center of other hole. I was replacing old drawer pulls on some of my cabinets with 3 1/2 centers, so I had to drill one new hole for vertical alignment and two new holes for horizontal to keep the pull centered on the drawer.
0points
0out of 0found this answer helpful.
answer 2
Asked by
LibertyHardwareSupport
January 11, 2013
These pulls are 3 inches from center screw to center screw. In measuring you should measure from the center of where the screw is inserted to get your width from screw hole to screw hole.
0points
0out of 0found this answer helpful.
Question

Sold individually?

Asked by
CLC
Virginia
about 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) on
January 2, 2013
Of course I need 33 instead of a nice even 30 or 40. I noticed there was the same model as individuals but none of the colors matched the Oil-Rubbed Bronze. The closest I could find was the Venetian Bronze. How close are these to being the same color?
 
Products related to my question
 
0points
0out of 0found this question helpful.
Answer this question
3 answers
Answers
answer 1
Asked by
LibertyHardwareSupport
January 3, 2013
For the individual pieces you can order Model # P39955C-VBC-C off of HD.com. This will be the exact same pull and finish that is in the 10 Pack.
+1point
1out of 1found this answer helpful.
answer 2
Asked by
Bgbob
Ohio, USA
December 25, 2013
They were sold individually at our local Home Depot
0points
0out of 0found this answer helpful.
answer 3
Asked by
Hamom3
San Jose, CA, USA
May 24, 2013
I believe this is the bronze with copper highlights.
0points
0out of 0found this answer helpful.
Question

3" half round foot pull/bronze /copper high

Asked by
Jude
Lino lakes,Mn
about 3 in. Oil-Rubbed Bronze Half-Round Foot Pulls (10-Pack) on
November 29, 2012
The 3 inch is too short do they come longer?
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
LibertyHardwareSupport
November 30, 2012
Unfortunately No, this pull only comes in the 3" center to center.
0points
0out of 0found this answer helpful.
1 of 1