Looking for Answers about Fasade Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White?

Customer questions and answers for
Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White

Fasade decorative thermoplastic wall panels are water, impact and stain resistant at a fraction of the price of other panels. Durable and timeless, these stylish panels add instant drama that leaves a lasting impression. Perfect for any room including: the garage, office or utility room. These decorative wall panels are available in 4 ft. x 8 ft. sheets in multiple styles and finishes.
Customer questions and answers:
14 Questions
 | 
15 Answers
Overall rating:
5 out of 5
5
out of
5
(2 Reviews)2

Customer questions and answers for Fasade Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White

Question

Can the panels be cut and how?

Asked by
Joon
Thousand Oaks, CA
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
November 16, 2014
Hello.
I intend to use panels as kitchen backsplash, covering entire wall underneath cabinets and surrounding a large window. There will be areas 4" wide by 40" X 40" long to cover with panel. Would this be a problem? What would the cut ends look like? Would they look finished? I'm not fond of the edging material in this line. Thank you so much.
June
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
November 18, 2014
Hello! Thank you for your question! Yes the panels can be cut, you can use a utility knife, scissors or a tin snips. Please feel free to direct any additional questions to our customer care department at 800.434.3750. Thank you!
0points
0out of 0found this answer helpful.
Question

Are these suitable for bathrooms? Are they impervious to water/moisture?

Asked by
Sandy
Rouses Pt., New York
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
September 15, 2014
I'm referring to the Dunes Paintable white wall panels.
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
September 17, 2014
Hello! Thank you for your question! Yes, our Fasade decorative panels are impervious to water and are suitable for use in bathrooms, kitchens and basements. The panels are made of PVC and although the panels are water resistant please keep in mind the substrate you are applying them to may not be. Please feel free to contact customer care for any additional questions (800.434.3750).
0points
0out of 0found this answer helpful.
Question

I am looking for the fasade wall panel in copper (4ft X 8ft) but I want the "waves / lines' to be running horizontal on the panel...

Asked by
ldummer
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
July 19, 2014
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
July 21, 2014
Hello! Thank you for your question! Currently, the Waves pattern is offered in the horizontal direction (S75). And can placed as a special order at your local Home Depot. Any sales associate can help you with this request. If have any further questions please feel free to contact our customer care department at 800.434.3750. Thank you!
0points
0out of 0found this answer helpful.
Question

Can I order a small sample to check color

Asked by
Courtney
Erie, Pa
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
June 18, 2014
I need to know if i can order a small sample to check the actual color again counters.
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
June 18, 2014
Hello! Thank you for your question! You can special request samples by contacting or visiting your local Home Depot stores special service desk with this request. To locate a store near you, please click on the “store locator” found on the top of each page. If you have any additional questions, please contact our Online Customer Service department at 800-434-3750. Thanks!
0points
0out of 0found this answer helpful.
Question

Can these Fasade products be seamlessly tiled?

Asked by
Sash
Folsom, CA
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
April 27, 2014
I am looking for a a seamless look to my wall. Due to the size i will need to use at least 6 panels. It is possible to cut and install these to achieve a seamless look?
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
April 28, 2014
Hello! Thank you for your question! The 4x8 decorative wall panels do not need additional fittings or pieces to put in between the seams because they have a ½ inch lip on the top and right side of the panel for overlapping purposes. You can overlap each panel as you install from left to right to help disguise the appearance of a seam. Please feel free to contact customer care for installation troubleshooting (800.434.3750).
+1point
1out of 1found this answer helpful.
Question

Do the lines parallel with the 8'?

Asked by
karen
santa cruz, ca
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
March 29, 2014
When I look at the picture, is the height 4' with the lines running 8'?
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
March 31, 2014
Hello Karen! Thank you for your question! This particular Fasade 4x8 Dunes panel is 'Vertical' so the pattern runs vertically with the 4' dimension. There is also an option to purchase the Dunes style in the horizontal style so the pattern runs horizontally with the 8' dimension. Please feel free to contact customer care for troubleshooting (800.434.3750).
0points
0out of 0found this answer helpful.
Question

WHAT IS THE DIFFERENCE BETWEEN THE WAVE-LIKE PATTERNS?

Asked by
karen
santa cruz, ca
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
March 29, 2014
I AM LOOKING AT "CURRENT" "DUNES" "WAVES", ETC. THEY SEEM VERY SIMILAR. ARE THERE DIFFERENCES AND HOW CAN I GET A BETTER IDEA OF THOSE DIFFERENCES?
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
March 31, 2014
Hello Karen! Thank you for your question! Each of the styles; Current, Dunes, and Waves have a different profile and depth concerning their particular pattern. Please feel free to contact customer care to request samples (800.434.3750).
0points
0out of 0found this answer helpful.
Question

CAN THEY BE USED AS SHOWER WALLS?

Asked by
DOOGIE
CHATTANOOGA, TN
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
February 2, 2014
CAN THESE PANELS BE USED IN A SHOWER? ARE THEY WATERPROOF?
0points
0out of 0found this question helpful.
Answer this question
2 answers
Answers
answer 1
Asked by
DesigningWoman
February 4, 2014
Hello DOOGIE and thank you for your question.

The Fasade 4 ft. x 8 ft. Dunes Vertical Argent Silver Wall Panel can be installed in a shower. It is stain and mildew resistant. You should use a divider trim between the adjoining vertical sections to ensure that no water gets behind the panel. The wall panel can be cleaned with sudsy water or an environmentally friendly cleaner (no abrasive cleaners). The Installation Guide has a list of Tools and Materials as well as proper wall preparation for a successful new shower: http://fasadeideas.com/t/Wall-Panel...

Best wishes on your project.
0points
0out of 0found this answer helpful.
answer 2
Asked by
YourFasadeTeam
May 27, 2014
Thank you for your question! Once you have your backsplash or wall panel installed, the panels can be cleaned with soap and water only. Any harsh abrasives will damage the finish on the tiles. As long as our panels are not exposed to certain shower and bathtub cleaners, the below finishes can be installed around the outside, above, or inside a shower. For additional protection in high traffic areas we recommend applying a silicone sealant for moisture resistance. The following finishes are the finishes that can be installed in the shower: 00, 11, 17-21, 30, and 31.
0points
0out of 0found this answer helpful.
Question

Can these be installed horizontally? Are the seams visible?

Asked by
Tina
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
November 6, 2013
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
November 6, 2013
Hello! Thank you for your question! The Vertical Dunes 4x8 wall panel has an overlapping lip on the top and right side of the panel to minimize the appearance of a seam. If you installed the vertical panel, horizontally, the seam may be more noticeable. We do offer a 4x8 wall panel in the Horizontal style that has the Dunes running the length of the 8' dimension. You can special order this item by contacting or visiting your local Home Depot stores special service desk with this request. To locate a store near you, please click on the “store locator” found on the top of each page. If you have any additional questions, please contact our Online Customer Service department at 800-430-3376. Thank you!
0points
0out of 0found this answer helpful.
Question

Is there a touch-up kit if we need to cut to make it look seamless again?

Asked by
MomOfTwoLilOnes
Dallas, TX
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
November 23, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
November 25, 2013
Thank you for your question. We do not have any touch up kits for the panels. If you have any questions please call Customer Service at 800.434.3750. Thank you!
0points
0out of 0found this answer helpful.
Question

Can I cover my house's roof (inside) with this panel?

Asked by
Dary
Juncos, Puerto Rico
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
October 7, 2013
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
October 8, 2013
Dary,

The preferred method for installing 4x8 wall panels is to use a notched trowel (1/4″ x 1/4″ x 3/4″) and apply the adhesive directly to the wall. Or rather, you can trowel the adhesive over the back of the panel. We recommend using PL Premium. Please see the installation guide for specific instructions.

Due to the weight of the 4x8 wall panels, we do not recommend installing the 4X8 panels to a ceiling application. The weight of the panels will cause the panels to fall down. Additionally, if the panels were cut into smaller sections, the lip of each panel section would not overlap. This would cause a noticeable seam. We do offer 2x4 Fasade Glue-up panels for ceiling applications. Please feel free to contact customer care for installation instructions (800.434.3750).
0points
0out of 0found this answer helpful.
Question

On this item is there a pattern match and if so what is it?

Asked by
Camille
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
February 22, 2013
 
Products related to my question
Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White
 
 
 
 
 
 
0points
0out of 0found this question helpful.
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
February 25, 2013
Hello Camille! Thank you for your question! The Dunes vertical pattern has the lines running vertically along the 4' dimension. If you have questions regarding how the panels overlap, installation questions, or need information on accessories related to the 4x8 wall panels, please feel free to contact customer care (800.434.3750).
0points
0out of 0found this answer helpful.
Question

Is the image shown the entire 4' x 8' sheet or is the sheet made up of sections with a space in between them?

Asked by
Justin
Minneapolis
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
March 2, 2013
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
YourFasadeTeam
March 4, 2013
Hello Justin! Thank you for your question. The 4'x8' Dunes Vertical Wall Panel is one large wall panel with the Dunes pattern running horizontal to the 4' dimension. There are not spaces or sections inside the panel. Please feel free to contact customer care for additional troubleshooting (800.434.3750).
0points
0out of 0found this answer helpful.
Question

are these returnable

Asked by
Odette
Union, nJ
about Dunes Vertical 96 in. x 48 in. Decorative Wall Panel in Gloss White on
January 28, 2013
I was going to order 2 samples in different colors and want to make sure I can return them.
0points
0out of 0found this question helpful.
Answer this question
1 answer
Answers
answer 1
Asked by
THDSupport
Kennesaw, Georgia
January 30, 2013
Hi Odette,

Yes, products purchased on homedepot.com can be returned to the store. Simply bring the item along with your shipment confirmation email, order confirmation email or packing slip for ease of return. Most products have a 90-day-from-purchase return policy. Please refer to the following link for exceptions and more information: http://www.homedepot.com/webapp/cat...
0points
0out of 0found this answer helpful.
1 of 1